EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 417 (2025) MATEC Web Conf., 417 (2025) 06018 References
Open Access
Issue
MATEC Web Conf.
Volume 417, 2025
2025 RAPDASA-RobMech-PRASA-AMI Conference: Bridging the Gap between Industry & Academia - The 26th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, co-hosted by CSIR and Tshwane University of Technology, Pretoria
Article Number 06018
Number of page(s) 16
Section Computational & Data-driven Modelling
DOI https://doi.org/10.1051/matecconf/202541706018
Published online 25 November 2025
  1. A.T. Sidambe, Biocompatibility of Advanced Manufactured Titanium Implants - A Review, Materials, 7, 12 (2014). https://doi.org/10.3390/ma7128168. [Google Scholar]
  2. A.T. Sidambe, Y. Tian, P.B. Prangnell, P. Fox, Effect of processing parameters on the densification, microstructure and crystallographic texture during the laser powder bed fusion of pure tungsten, Int. J. Refract. Met. Hard. Mater., 78, (2018). https://doi.org/10.1016/j.ijrmhm.2018.10.004. [Google Scholar]
  3. X. Zhou, X.H. Liu, D.D. Zhang, Z.J. Shen, W. Liu, Balling phenomena in selective laser melted tungsten, J. Mater. Process. Tech., 222, (2015). https://doi.org/10.1016/j.jmatprotec.2015.02.032. [Google Scholar]
  4. J. Braun, L. Kaserer, J. Stajkovic, K.H. Leitz, B. Tabernig, P. Singer, et al., Molybdenum and tungsten manufactured by selective laser melting - Analysis of defect structure and solidification mechanisms, Int. J. Refract. Met. Hard. Mater., (2019). https://doi.org/10.1016/j.ijrmhm.2019.104999. [Google Scholar]
  5. S. Sharma, K.V.M. Krishna, S.S. Joshi, M. Radhakrishnan, S. Palaniappan, S. Dussa, et al., Laser based additive manufacturing of tungsten: Multi-scale thermo-kinetic and thermo-mechanical computational model and experiments, Acta Mater., 259, (2023). https://doi.org/10.1016/j.actamat.2023.119244. [Google Scholar]
  6. B. Vrancken, R.K. Ganeriwala, M.J. Matthews, Analysis of laser-induced microcracking in tungsten under additive manufacturing conditions: Experiment and simulation, Acta Mater., 194, (2020). https://doi.org/10.1016/j.actamat.2020.04.060. [Google Scholar]
  7. A. Sidambe, P. Fox, Melt pool analysis of laser powder bed fusion tungsten - Experimental and simulation, in Proceedings of the Plansee Seminar 2022 Reutte, Austria, (2022). [Google Scholar]
  8. OpenFOAM, OpenFOAM User Guide,(2022). https://www.openfoam.com/documentation/user-guide/1-introduction. (Accessed 25 June 2025). [Google Scholar]
  9. F. Wirth, T. Tonn, M. Schöberl, S. Hermann, H. Birkhofer, V. Ploshikhin, Implementation of the Marangoni effect in an open-source software environment and the influence of surface tension modeling in the mushy region in laser powder bed fusion (LPBF), Model. Simul. Mater. Sci. Eng., 30, 3 (2022). https://doi.org/10.1088/1361-651X/ac4a26. [Google Scholar]
  10. T. Holzmann, Open Source LASER Boundary Condition with Linear and Circular Spot Motion and Additional Heat-Transfer, in Proceedings of the OpenFOAM User Meeting PFAU XIII (2016). [Google Scholar]
  11. B. Vrancken, R.K. Ganeriwala, A.A. Martin, M.J. Matthews, Microcrack mitigation during laser scanning of tungsten via preheating and alloying strategies, Addit. Manuf., 46, (2021). https://doi.org/10.1016/j.addma.2021.102158. [Google Scholar]
  12. B. Brown, Characterization of 304L stainless steel by means of minimum input energy on the selective laser melting platform, Masters Thesis, Missouri University Of Science and Technology, Missouri, USA, (2014). [Google Scholar]
  13. J. Lundkvist, CFD Simulation of Fluid Flow During Laser Metal Wire Deposition using OpenFOAM: 3D printing, Masters Thesis, Luleå University of Technology,, Sweden, (2019). [Google Scholar]
  14. R.S. Burdon, Surface tension and the spreading of liquids, (Cambridge University Press, Cambridge, England, 2014). [Google Scholar]
  15. L. Thijs, M.L. Montero Sistiaga, R. Wauthle, Q. Xie, J.-P. Kruth, J. Van Humbeeck, Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum, Acta Mater., 61, 12 (2013). https://doi.org/10.1016/j.actamat.2013.04.036. [Google Scholar]
  16. W. Shifeng, L. Shuai, W. Qingsong, C. Yan, Z. Sheng, S. Yusheng, Effect of molten pool boundaries on the mechanical properties of selective laser melting parts, J. Mater. Process. Technol., 214, 11 (2014). https://doi.org/10.1016/j.jmatprotec.2014.06.002. [Google Scholar]
  17. L. Erik, S. Wolf-Dieter, Tungsten: properties, chemistry, technology of the element, alloys, and chemical compounds, (Plenum Publishers, New York, USA, 1999). [Google Scholar]
  18. P.-F. Paradis, T. Ishikawa, S. Yoda, Viscosity of liquid undercooled tungsten, J. Appl. Phys., 97, 10 (2005). https://doi.org/10.1063/1.1896432. [Google Scholar]
  19. C. Tan, K. Zhou, W. Ma, B. Attard, P. Zhang, T. Kuang, Selective laser melting of high-performance pure tungsten: parameter design, densification behavior and mechanical properties, Sci. Technol. Adv. Mater., (2018). https://doi.org/10.1080/14686996.2018.1455154. [Google Scholar]
  20. S.A. Khairallah, A.T. Anderson, A. Rubenchik, W.E. King, Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones, Acta Mater., 108, (2016). https://doi.org/10.1016/j.actamat.2016.02.014. [Google Scholar]
  21. J.U. Brackbill, D.B. Kothe, C. Zemach, A continuum method for modeling surface tension, J. Comput. Phys., 100, 2 (1992). https://doi.org/10.1016/0021-9991(92)90240-Y. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.