EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 417 (2025) MATEC Web Conf., 417 (2025) 05011 References
Open Access
Issue
MATEC Web Conf.
Volume 417, 2025
2025 RAPDASA-RobMech-PRASA-AMI Conference: Bridging the Gap between Industry & Academia - The 26th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, co-hosted by CSIR and Tshwane University of Technology, Pretoria
Article Number 05011
Number of page(s) 11
Section Process Development
DOI https://doi.org/10.1051/matecconf/202541705011
Published online 25 November 2025
  1. B. Cantor, I. T. Chang, P. Knight, and A. Vincent, Microstructural development in equiatomic multicomponent alloys, Mater Sci Eng: A. 375, 213-218, (2004). https://doi.org/10.1016/j.msea.2003.10.257 [Google Scholar]
  2. C. O. Ujah, Characteristic Properties and Applications of Ceramics Particulates-Reinforced High Entropy Alloys for Structural Application, Trans. Indian Inst. Met. 78, 1-17, (2025). http://dx.doi.org/10.1007/s12666-025-03562-6. [Google Scholar]
  3. C. O. Ujah, D. V. Von Kallon, and V. S. Aigbodion, High entropy alloys prepared by spark plasma sintering: mechanical and thermal properties, Mater. Today Sustain. 25, 100639, (2024). http://dx.doi.org/10.1016/j.mtsust.2023.100639. [Google Scholar]
  4. X.-C. Deng and G.-H. Zhang, Preparation of high-performance (ZrHfTaNbTiMo) C–10Co ceramic by SPS using self-synthesized fine high-entropy carbide powders, Ceram. Int. 50, 21050-21058, (2024). https://doi.org/10.1016/j.ceramint.2024.03.213. [Google Scholar]
  5. L. Li, D. Zhou, K. Zhao, L. Jiang, H. Kang, E. Guo, F. Mao, Z. Chen, T. Wang, Effects of reinforcement content and homogenization treatment on the microstructure and mechanical properties of in-situ TiB2/2219Al composites, Acta Metall. Sin. (Engl. Lett.). 37, 1421-1437, (2024). https://doi.org/10.1007/s40195-024-01695-z. [Google Scholar]
  6. J. X. Liu, X. Q. Shen, Y. Wu, F. Li, Y. Liang, and G. J. Zhang, Mechanical properties of hot-pressed high-entropy diboride-based ceramics, J. Adv. Ceram. 9, 503-510, (2020). https://doi.org/10.1007/s40145-020-0383-8. [Google Scholar]
  7. J. Pan, T. Dai, T. Lu, X. Ni, J. Dai, and M. Li, Microstructure and mechanical properties of Nb25Mo25Ta25W25 and Ti8Nb23Mo23Ta23W23 high entropy alloys prepared by mechanical alloying and spark plasma sintering, Mater. Sci. Eng: A. 738, 362-366, (2018). https://doi.org/10.1016/j.msea.2018.09.089. [Google Scholar]
  8. N. Chikhradze, N. Jalabadze, M. Chikhradze, D. Tsverava, and G. Janikashvili, Shock-wave syntheses of high entropy alloys in Fe-W-Al-Ti-Ni-BC system, International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM. 87-94, (2023). https://doi.org/10.5593/sgem2023/6.1/s24.10. [Google Scholar]
  9. Z. Wang, F. Xing, G. Xu, W. Liu, and H. Bian, Microstructure and mechanical properties of additive manufactured TiC-reinforced Fe55Cr25Co10Ni10 high-entropy alloy composites, Opt. Laser Technol. 187, (2025). https://doi.org/10.1016/j.optlastec.2025.112870. [Google Scholar]
  10. T. Yan, M. Luo, J. Chen, H. Zhu, J. Chai, L. Niu, B. Chen, Y. Zhu, T. Shen, Microstructure and mechanical properties of high entropy (MoTaTiVW) C5 ceramics toughened with silicon carbide whisker, Ceram. Int. 50, 15840-15847, (2024). https://doi.org/10.1016/j.ceramint.2024.02.063. [Google Scholar]
  11. X. F. Zhang, H. Terasaki, and Y. Komizo, Correlation of delta-ferrite precipitation with austenite grain growth during annealing of steels, Philos. Mag. Lett, 91, 491-497, (2011). https://doi.org/10.1080/09500839.2011.587464. [Google Scholar]
  12. Y. Lin, X. Zhang, Q. Le, T. Wang, Q. Liao, and L. Liu, Achieving the improvement of tensile properties and corrosion resistance of Mg-Gd-Sn-Y-Zn-Mn alloy by increasing the concentration of solute elements in nearly equal-amplitude, J. Alloy. Compd. 1010, (2025). https://doi.org/10.1016/j.jallcom.2024.178323. [Google Scholar]
  13. R. Thirumavalavan, V. Santhosh, S. Sugunarani, S. Regupathi, and S. Sundaravignesh, Characterization of Silicon Carbide and Aluminum Oxide Reinforced 6061-T6 Aluminum Matrix Composites, SAE Technical Papers, No. 2024-01-5262, (2024). https://doi.org/10.4271/2024-01-5262. [Google Scholar]
  14. S. K. Choi, S. W. Ui, I. S. Choi, and S. C. Choi, Densification behavior of ZrB2 with Co–WC as additives, J. Ceram. Soc. Jpn. 122, 198-203, (2014). https://doi.org/10.2109/jcersj2.122.198. [Google Scholar]
  15. L. He, M. Zhang, D. Wang, X. Ye, Y. Zhou, D. Ruan, and W. Zhang, Microstructure and mechanical properties of in-situ dual ceramic phase synergistic strengthened CoCrMoNbTi (B4C) x high entropy alloy coating, Opt. Laser Technol. 161, 109172, (2023). https://doi.org/10.1016/j.optlastec.2023.109172. [Google Scholar]
  16. O. Dushko, G. Voronkova, and S. Rekunov, Research of the Brittleness and Crack Resistance of Samples Made of Highly Hardened Silicon Carbide Ceramics, Key Eng. Mater. 909, 13-20, (2022). https://doi.org/10.4028/p-1z718k. [Google Scholar]
  17. C. O. Ujah, P. A. Popoola, O. Popoola, E.O Afolabi and U. O. Uyor, Investigating the nanomechanical and thermal characteristics of Ti20-Al20-V20-Fe20-Ni20 HEA developed via SPS for high energy applications, Metall. Res. Technol. 119, 616 - 630, (2022). https://doi.org/10.1051/metal/2022102. [Google Scholar]
  18. C. Ujah, A. Popoola, O. Popoola, and U. Uyor, Analysis of the Microstructure and Tribology of Ti36-Al16-V16-Fe16-Cr16 HEA Developed with SPS for Engineering Applications, J. Mater. 74, 4239-4249, (2022). https://doi.org/10.1007/s11837-022-05509-4. [Google Scholar]
  19. H. Wang, L. Zhang, J. Deng, L. Li, Y. Rong, C. Tan, and F. Wang, Microstructure and mechanical properties of ZrB2 ceramic particle reinforced AlCoCrFeNi high entropy alloy composite materials prepared by spark plasma sintering, Ceram. Int. 50, 45311-45319, (2024). https://doi.org/10.1016/j.ceramint.2024.08.371. [Google Scholar]
  20. I. R. Lavagnini, J. V. Campos, L. M. Jesus, A. O. Lobo, S. K. Ghose, R. Raj, et al., In-situ synchrotron X-ray diffraction of hydroxyapatite-zirconia composite during conventional and flash sintering, J. Eur. Ceram. Soc. 44, 4709-4718, (2024). https://doi.org/10.1016/j.jeurceramsoc.2024.01.070. [Google Scholar]
  21. C. O. Ujah, P. A. Popoola, O. Popoola, and U. O. Uyor, Mechanical and thermal behaviors of Ti36-Al16-V16-Fe16-Cr16 high entropy alloys fabricated by spark plasma sintering: An advanced material for high temperature/strength applications, J. Compos. Mater. 56, 3913-3923, (2022). https://doi.org/10.1177/00219983221111498. [Google Scholar]
  22. H. Zhao, Z. Zheng, T. Jiang, L. Fu, B. Akhavan, M. M. Bilek, and Z. Liu, High entropy alloy thin films on SS304 substrates: Evolution of microstructure and interface modulated by energetic condensation in nanoscale, Mat Des. 230, 11198, (2023). https://doi.org/10.1016/j.matdes.2023.111981. [Google Scholar]
  23. T. H. Liu, T. Wang, J. Zhou, X. Qian, and R. Yang, Multi-Carrier Thermal Transport in Electronic and Energy Conversion Devices, arXiv preprint arXiv: 2502.10664, (2025). https://doi.org/10.48550/arXiv.2502.10664. [Google Scholar]
  24. W. Dang, J. Wang, and A. Ni, Simulation of unidirectional composite delamination using fiber bundle interface strength, Theor. Appl. Fract. Mech. 138, (2025). https://doi.org/10.1016/j.tafmec.2025.104915. [Google Scholar]
  25. W. Zhang, M. Zhang, Y. Peng, L. Wang, Y. Liu, S. Hu, and Y. Hu, Interfacial structures and mechanical properties of a high entropy alloy-diamond composite, Int J Refract Met H, 86, (2020). https://doi.org/10.1016/j.ijrmhm.2019.105109. [Google Scholar]
  26. T. Yan, M. Luo, J. Chen, H. Zhu, J. Chai, L. Niu, et al., Microstructure and mechanical properties of high entropy (MoTaTiVW) C5 ceramics toughened with silicon carbide whisker, Ceram. Int. 50, 15840-15847, (2024). https://doi.org/10.1016/j.ceramint.2024.02.063 [Google Scholar]
  27. B. Denkena, L. Gottwik, T. Grove, and A. Wippermann, Temperature and energy partition for grinding of mixed oxide ceramics, Prod. Eng. 11, 409-417, (2017). https://doi.org/10.1007/s11740-017-0757-0. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.