EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 417 (2025) MATEC Web Conf., 417 (2025) 05009 References
Open Access
Issue
MATEC Web Conf.
Volume 417, 2025
2025 RAPDASA-RobMech-PRASA-AMI Conference: Bridging the Gap between Industry & Academia - The 26th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, co-hosted by CSIR and Tshwane University of Technology, Pretoria
Article Number 05009
Number of page(s) 19
Section Process Development
DOI https://doi.org/10.1051/matecconf/202541705009
Published online 25 November 2025
  1. B. Blakey-Milner, P. Gradl, G. Snedden, M. Brooks, J. Pitot, E. Lopez, M. Leary, F. Berto, and A. du Plessis, Metal additive manufacturing in aerospace: A review, Mater. Des. 209, (2021). http://dx.10.1016/j.matdes.2021.110008.org/ [Google Scholar]
  2. N. T. Aboulkhair, N. M. Everitt, I. Ashcroft, and C. Tuck, Reducing porosity in AlSi10Mg parts processed by selective laser melting, Addit. Manuf. 1-4, 77-86 (2014). http://dx.10.1016/j.addma.2014.08.001.org/ [Google Scholar]
  3. Q. Jia and D. Gu, Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties, J. Alloys Compd. 585, 713-721 (2014). http://dx.10.1016/j.jallcom.2013.09.171.org/ [Google Scholar]
  4. L. Thijs, F. Verhaeghe, T. Craeghs, J. V. Humbeeck, and J.-P. Kruth, A study of the microstructural evolution during selective laser melting of Ti–6Al–4V, Acta. Mater. 58, 3303-3312 (2010). http://dx.10.1016/j.actamat.2010.02.004.org/ [Google Scholar]
  5. J. S. Saini, L. Dowling, D. Trimble, and D. Singh, Mechanical Properties of Selective Laser Melted CoCr Alloys: A Review, J. Mater. Eng. Perform. 30, 8700-8714 (2021). http://dx.10.1007/s11665-021-06283-1.org/ [Google Scholar]
  6. S. Banerjee, G. Kulesha, M. Kester, and M. A. Mont, Emerging Technologies in Arthroplasty: Additive Manufacturing, J. Knee Surg. (2014). http://dx.10.1055/s-0034-1374810.org/ [Google Scholar]
  7. Y. Duan, X. Liu, S. Zhang, L. Wang, F. Ding, S. Song, X. Chen, B. Deng, and Y. Song, Selective Laser Melted Titanium Implants Play a Positive Role in Early Osseointegration in Type 2 Diabetes Mellitus Rats, Dent. Mater. J. (2020). http://dx.10.4012/dmj.2018-419.org/ [Google Scholar]
  8. Y. He, D. Burkhalter, D. B. Durocher, and J. M. Gilbert, “Solid-Lattice Hip Prosthesis Design: Applying Topology and Lattice Optimization to Reduce Stress Shielding From Hip Implants,” in Proceedings of the 2018 Design of Medical Devices Conference, Minneapolis, Minnesota, USA, April 9–12 (2018) [Google Scholar]
  9. J. Matena, S. Petersen, M. Gieseke, A. Kampmann, M. Teske, M. Beyerbach, H. M. Escobar, H. Haferkamp, N.-C. Gellrich, and I. Nolte, SLM Produced Porous Titanium Implant Improvements for Enhanced Vascularization and Osteoblast Seeding, Int. J. Mol. Sci. (2015). http://dx.10.3390/ijms16047478.org/ [Google Scholar]
  10. L. Mullen, R. Stamp, W. Brooks, E. S. Jones, and C. Sutcliffe, Selective Laser Melting: A Regular Unit Cell Approach for the Manufacture of Porous, Titanium, Bone In‐growth Constructs, Suitable for Orthopedic Applications, J. Biomed. Mater. Res. B Appl. Biomater. (2008). http://dx.10.1002/jbm.b.31219.org/ [Google Scholar]
  11. S. A. Naghavi, M. Tamaddon, P. Garcia-Souto, M. Moazen, S. W. Taylor, J. Hua, and C. Liu, A Novel Hybrid Design and Modelling of a Customised Graded Ti-6Al-4v Porous Hip Implant to Reduce Stress-Shielding: An Experimental and Numerical Analysis, Frontiers in Bioengineering and Biotechnology (2023). http://dx.10.3389/fbioe.2023.1092361.org/ [Google Scholar]
  12. Y. Okazaki and J. Mori, Mechanical Performance of Artificial Hip Stems Manufactured by Hot Forging and Selective Laser Melting Using Biocompatible Ti-15Zr-4Nb Alloy, Materials (2021). http://dx.10.3390/ma14040732.org/ [Google Scholar]
  13. W. Peng, L. Xu, J. You, L. Fang, and Q. Zhang, Selective Laser Melting of Titanium Alloy Enables Osseointegration of Porous Multi-Rooted Implants in a Rabbit Model, Biomedical Engineering Online (2016). http://dx.10.1186/s12938-016-0207-9.org/ [Google Scholar]
  14. M. Tsukanaka, S. Fujibayashi, M. Takemoto, T. Matsushita, T. Nakamura, K. Sasaki, and S. Matsuda, Bioactive Treatment Promotes Osteoblast Differentiation on Titanium Materials Fabricated by Selective Laser Melting Technology, Dent. Mater. J. (2016). http://dx.10.4012/dmj.2015-127.org/ [Google Scholar]
  15. S. Xiang, Y. Yuan, C. Zhang, and J. Chen, Effects of Process Parameters on the Corrosion Resistance and Biocompatibility of Ti6Al4V Parts Fabricated by Selective Laser Melting, Acs Omega (2022). http://dx.10.1021/acsomega.1c06246.org/ [Google Scholar]
  16. J. Yang, X. Yu, Z. Zhang, R. Xu, F. Wu, T. Wang, Y. Liu, J. Ouyang, and F. Deng, Surface Modification of Titanium Manufactured Through Selective Laser Melting Inhibited Osteoclast Differentiation Through Mitogen-Activated Protein Kinase Signaling Pathway, J. Biomater. Appl. (2020). http://dx.10.1177/0885328220920457.org/ [Google Scholar]
  17. K. G. Prashanth, S. Scudino, and J. Eckert, Defining the tensile properties of Al-12Si parts produced by selective laser melting, Acta. Mater. 126, 25-35 (2017). http://dx.https://doi.org/10.1016/j.actamat.2016.12.044.org/ [Google Scholar]
  18. B. AlMangour, M. Luqman, D. Grzesiak, H. Al-Harbi, and F. Ijaz, Effect of processing parameters on the microstructure and mechanical properties of Co–Cr– Mo alloy fabricated by selective laser melting, Mater. Sci. Eng. A 792, (2020). http://dx.10.1016/j.msea.2020.139456.org/ [Google Scholar]
  19. B. Zhang, Y. Li, and Q. Bai, Defect Formation Mechanisms in Selective Laser Melting: A Review, Chinese Journal of Mechanical Engineering (English Edition) 30, 515-527 (2017). http://dx.10.1007/s10033-017-0121-5.org/ [Google Scholar]
  20. I. Yadroitsev, Selective laser melting: Direct manufacturing of 3D-objects by selective laser melting of metal powders, (2009) [Google Scholar]
  21. H. Y. Chia, J. Wu, X. Wang, and W. Yan, Process parameter optimization of metal additive manufacturing: a review and outlook, J. Mater. Info. 2, 16-16 (2022). http://dx.10.20517/jmi.2022.18.org/ [Google Scholar]
  22. L. Tonelli, A. Fortunato, and L. Ceschini, CoCr alloy processed by Selective Laser Melting (SLM): effect of Laser Energy Density on microstructure, surface morphology, and hardness, J. Manuf. Process. 52, 106-119 (2020). http://dx.10.1016/j.jmapro.2020.01.052.org/ [CrossRef] [Google Scholar]
  23. A. Matos Da Silva Costa, J. P. Oliveira, A. Luiz, J. Munhoz, E. Guimarães, B. Leite, D. Souza De Freitas, M. De, J. Monteiro, and J. Rodriguez, Co-Cr-Mo alloy fabricated by laser powder bed fusion process: grain structure, defect formation, and mechanical properties, http://dx.10.1007/s00170-021-07570-w/Published.org/ [Google Scholar]
  24. K. P. Gupta, The Co-Cr-Mo (cobalt-chromium-molybdenum) system, 26, 87-92 (2005) [Google Scholar]
  25. Y. Kajima, A. Takaichi, T. Nakamoto, T. Kimura, Y. Yogo, M. Ashida, H. Doi, N. Nomura, H. Takahashi, T. Hanawa, and N. Wakabayashi, Fatigue strength of Co-Cr-Mo alloy clasps prepared by selective laser melting, J. Mech. Behav. Biomed. Mater. 59, 446-458 (2016). http://dx.10.1016/j.jmbbm.2016.02.032.org/ [Google Scholar]
  26. L. H. M. Antunes, J. J. Hoyos, E. B. Fonseca, M. Béreš, P. F. da Silva Farina, E. S. N. Lopes, A. L. Jardini, and R. M. Filho, Effect of phase transformation on ductility of additively manufactured Co–28Cr–6Mo alloy: An in situ synchrotron X-ray diffraction study during mechanical testing, Mater. Sci. Eng. A 764, (2019). http://dx.10.1016/j.msea.2019.138262.org/ [Google Scholar]
  27. S. L. Sing, S. Huang, and W. Y. Yeong, Effect of solution heat treatment on microstructure and mechanical properties of laser powder bed fusion produced cobalt-28chromium-6molybdenum, Mater. Sci. Eng. A 769, (2020). http://dx.10.1016/j.msea.2019.138511.org/ [Google Scholar]
  28. M. Zhang, Y. Yang, C. Song, Y. Bai, and Z. Xiao, An investigation into the aging behavior of CoCrMo alloys fabricated by selective laser melting, J. Alloys Compd. 750, 878-886 (2018). http://dx.10.1016/j.jallcom.2018.04.054.org/ [Google Scholar]
  29. Z. Wang, S. Y. Tang, S. Scudino, Y. P. Ivanov, R. T. Qu, D. Wang, C. Yang, W. W. Zhang, A. L. Greer, J. Eckert, and K. G. Prashanth, Additive manufacturing of a martensitic Co–Cr–Mo alloy: Towards circumventing the strength–ductility trade-off, Addit. Manuf. 37, (2021). http://dx.10.1016/j.addma.2020.101725.org/ [Google Scholar]
  30. W. Liu, Q. Xie, Y. Cao, J. Wang, and P. Bai, Optimization of processing parameters for LPBF-manufactured CoCr alloys based on laser volume energy density, J. Mater. Res. Technol. 27, 4053-4063 (2023). http://dx.10.1016/j.jmrt.2023.10.268.org/ [Google Scholar]
  31. P. Mercelis and J. P. Kruth, Residual stresses in selective laser sintering and selective laser melting, Rapid Prototyping Journal 12, 254-265 (2006). http://dx.10.1108/13552540610707013.org/ [CrossRef] [Google Scholar]
  32. T. de Terris, O. Andreau, P. Peyre, F. Adamski, I. Koutiri, C. Gorny, and C. Dupuy, Optimization and comparison of porosity rate measurement methods of Selective Laser Melted metallic parts, Addit. Manuf. 28, 802-813 (2019). http://dx.10.1016/j.addma.2019.05.035.org/ [Google Scholar]
  33. K. Geels, Metallographic and Materialographic Specimen Preparation, Light Microscopy, Image Analysis and Hardness Testing, (2007) [Google Scholar]
  34. C. Li, Q. Zhang, Y. Ren, W. Chen, W. Li, J. Chen, and L. Zhou, Influence of energy density on the microstructure and property regulation of additive manufactured pure nickel, Advances in Mechanical Engineering 16, (2024). http://dx.10.1177/16878132241230228.org/ [Google Scholar]
  35. W. E. King, H. D. Barth, V. M. Castillo, G. F. Gallegos, J. W. Gibbs, D. E. Hahn, C. Kamath, and A. M. Rubenchik, Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing, J. Mater. Process. Technol. 214, 2915-2925 (2014). http://dx.10.1016/j.jmatprotec.2014.06.005.org/ [Google Scholar]
  36. U. Scipioni Bertoli, A. J. Wolfer, M. J. Matthews, J.-P. R. Delplanque, and J. M. Schoenung, On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting, Mater. Des. 113, 331-340 (2017). http://dx.10.1016/j.matdes.2016.10.037.org/ [CrossRef] [Google Scholar]
  37. T. W. Eagar and N. S. Tsai, TEMPERATURE FIELDS PRODUCED BY TRAVELING DISTRIBUTED HEAT SOURCES, Weld. J. 62, 346-355 (1983). http://dx.scopus.com/pages/publications/0020880803?inward=#tab=similar.org/ [Google Scholar]
  38. T. Yang, T. Liu, W. Liao, E. MacDonald, H. Wei, C. Zhang, X. Chen, and K. Zhang, Laser powder bed fusion of AlSi10Mg: Influence of energy intensities on spatter and porosity evolution, microstructure and mechanical properties, J. Alloys Compd. 849, (2020). http://dx.10.1016/j.jallcom.2020.156300.org/ [Google Scholar]
  39. A. Takaichi, Y. Kajima, N. Kittikundecha, H. L. Htat, H. H. Wai Cho, T. Hanawa, T. Yoneyama, and N. Wakabayashi, Effect of heat treatment on the anisotropic microstructural and mechanical properties of Co-Cr-Mo alloys produced by selective laser melting, J Mech Behav Biomed Mater 102, 103496 (2020). http://dx.10.1016/j.jmbbm.2019.103496.org/ [Google Scholar]
  40. Z. Chen, Z. Xia, Y. Cheng, Y. Song, T. Wei, C. Ge, C. Lu, C. Wang, X. Zhu, and Q. Jia, New insights into the mechanical property anisotropy of CoCrMo alloy fabricated by laser powder bed fusion (LPBF), Mater. Sci. Eng. A 925, (2025). http://dx.10.1016/j.msea.2025.147878.org/ [Google Scholar]
  41. M. Roudnická, O. Molnárová, J. Drahokoupil, J. Kubásek, J. Bigas, V. Šreibr, D. Paloušek, and D. Vojtěch, Microstructural instability of L-PBF Co-28Cr-6Mo alloy at elevated temperatures, Addit. Manuf. 44, (2021). http://dx.10.1016/j.addma.2021.102025.org/ [Google Scholar]
  42. Z. W. Chen, M. A. L. Phan, and K. Darvish, Grain growth during selective laser melting of a Co–Cr–Mo alloy, J. Mater. Sci. 52, 7415-7427 (2017). http://dx.10.1007/s10853-017-0975-z.org/ [Google Scholar]
  43. S. Zhang, Y. Lei, Z. Chen, P. Wei, W. Liu, S. Yao, and B. Lu, Effect of Laser Energy Density on the Microstructure and Texture Evolution of Hastelloy-X Alloy Fabricated by Laser Powder Bed Fusion, Materials (Basel) 14, (2021). http://dx.10.3390/ma14154305.org/ [Google Scholar]
  44. D. Gu, Y.-C. Hagedorn, W. Meiners, G. Meng, R. J. S. Batista, K. Wissenbach, and R. Poprawe, Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium, Acta. Mater. 60, 3849-3860 (2012). http://dx.https://doi.org/10.1016/j.actamat.2012.04.006.org/ [Google Scholar]
  45. J. L. Bartlett and X. Li, An overview of residual stresses in metal powder bed fusion, Addit. Manuf. 27, 131-149 (2019). http://dx.10.1016/j.addma.2019.02.020.org/ [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.