EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 417 (2025) MATEC Web Conf., 417 (2025) 03015 References
Open Access
Issue
MATEC Web Conf.
Volume 417, 2025
2025 RAPDASA-RobMech-PRASA-AMI Conference: Bridging the Gap between Industry & Academia - The 26th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, co-hosted by CSIR and Tshwane University of Technology, Pretoria
Article Number 03015
Number of page(s) 12
Section Materials Engineering
DOI https://doi.org/10.1051/matecconf/202541703015
Published online 25 November 2025
  1. Z. Li, D. Wu, W. Lü, H. Yu, Z. Shao, L. Luo, Effect of holding time on the microstructure and mechanical properties of dual-phase steel during intercritical annealing, J. Wuhan Univ. Technol. Mater. Sci. Ed. 30 156–161 (2015). https://doi.org/10.1007/s11595-015-1118-5. [Google Scholar]
  2. M. Alibeyki, H. Mirzadeh, M. Najafi, Fine-grained dual phase steel via intercritical annealing of cold-rolled martensite, Vacuum. 155 147–152 (2018). https://doi.org/10.1016/j.vacuum.2018.06.003. [Google Scholar]
  3. Z. Xiong, K. Andrii, S. Nicole, V.P. Elena, Effect of Holding Temperature and Time on Ferrite Formation in Dual Phase Steel Produced by Strip Casting, Mater. Forum. 38 44–48 (2014). [Google Scholar]
  4. S. Wu, D. Wang, X. Di, C. Li, Z. Zhang, Z. Zhou, X. Liu, Strength-toughness improvement of martensite-austenite dual phase deposited metals after austenite reversed treatment with short holding time, Mater. Sci. Eng. A. 755 57–65 (2019). https://doi.org/10.1016/j.msea.2019.03.125. [Google Scholar]
  5. M. Zamani, H. Mirzadeh, M. Maleki, Enhancement of mechanical properties of low carbon dual phase steel via natural aging, Mater. Sci. Eng. A. 734 178–183 (2018). https://doi.org/10.1016/j.msea.2018.07.105. [Google Scholar]
  6. M. Aksoy, A. Esin, Improving the mechanical properties of structural carbon steel by dual-phase heat treatment, J. Mater. Eng. 10 281–287 (1988). https://doi.org/10.1007/BF02834157. [Google Scholar]
  7. X. Zuo, Y. Chen, M. Wang, Study on microstructures and work hardening behavior of ferrite-martensite dual-phase steels with high-content martensite, Mater. Res. 15 915–921 (2012). https://doi.org/10.1590/S1516-14392012005000118. [Google Scholar]
  8. Z. Xiong, A.G. Kostryzhev, Y. Zhao, E. V. Pereloma, Microstructure Evolution during the Production of Dual Phase and Transformation Induced Plasticity Steels Using Modified Strip Casting Simulated in The Laboratory, Metals (Basel). 9 449 (2019). https://doi.org/10.3390/met9040449. [Google Scholar]
  9. Z.P. Xiong, A.G. Kostryzhev, N.E. Stanford, E. V. Pereloma, Microstructures and mechanical properties of dual phase steel produced by laboratory simulated strip casting, Mater. Des. 88 537–549 (2015). https://doi.org/10.1016/j.matdes.2015.09.031. [Google Scholar]
  10. E. Olorundaisi, T. Jamiru, T.A. Adegbola, O.F. Ogunbiyi, Modeling and optimization of operating parameters using RSM for mechanical behaviour of dual phase steels, Mater. Res. Express. 6 105628 (2019). https://doi.org/10.1088/2053-1591/ab430e. [Google Scholar]
  11. F.G. Caballero, A. García-Junceda, C. Capdevila, C.G. De Andrés, Evolution of microstructural banding during the manufacturing process of dual phase steels, Mater. Trans. 47 2269–2276 (2006). https://doi.org/10.2320/matertrans.47.2269. [Google Scholar]
  12. A.K. Panda, P.K. Ray, R.I. Ganguly, Effect of thermomechanical treatment parameters on mechanical properties of duplex ferrite-martensite structure in dual phase steel, Mater. Sci. Technol. 16 648–656 (2000). https://doi.org/10.1179/026708300101508225. [Google Scholar]
  13. K.K. Alaneme, C.M. Kamma, Phase transformation studies af a low alloy steel in the (α + γ) phase region, Mater. Res. 13 113–117 (2010). https://doi.org/10.1590/S1516-14392010000100022. [Google Scholar]
  14. W. Handoko, A. Anurag, F. Pahlevani, R. Hossain, K. Privat, V. Sahajwalla, Effect of selective-precipitations process on the corrosion resistance and hardness of dual-phase high-carbon steel, Sci. Rep. 9 1–11 (2019). https://doi.org/10.1038/s41598-019-52228-z. [Google Scholar]
  15. E. Salamci, S. Candan, F. Kabakci, Effect of microstructure on corrosion behavior of dual-phase steels, Kov. Mater. 55 133–139 (2017). https://doi.org/10.4149/km-2017-2-133. [Google Scholar]
  16. B.M. Gurumurthy, S.S. Sharma, A. Kini, Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel, Mater. Today Proc. 5 24907–24914 (2018). https://doi.org/10.1016/j.matpr.2018.10.290. [Google Scholar]
  17. E. Olorundaisi, T. Jamiru, T.A. Adegbola, Mechanical and microstructural evaluation of dual phase steel, quenched in bitumen and water at an intercritical temperature: Effect of holding time, Mater. Res. Express. 6 115606 (2019). https://doi.org/10.1088/2053-1591/ab4747. [Google Scholar]
  18. F. Jamei, H. Mirzadeh, M. Zamani, Synergistic effects of holding time at intercritical annealing temperature and initial microstructure on the mechanical properties of dual phase steel, Mater. Sci. Eng. A. 750 125–131 (2019). https://doi.org/10.1016/j.msea.2019.02.052. [Google Scholar]
  19. K. Radwanski, R. Kuziak, R. Rozmus, Structure and mechanical properties of dual-phase steel following heat treatment simulations reproducing a continuous annealing line, Arch. Civ. Mech. Eng. 19 453–468 (2019). https://doi.org/10.1016/j.acme.2018.12.006. [Google Scholar]
  20. R.Y.P.A.S.C. Dhiraj Bhika Chaudhari, Effect of Quenching Parameters on Material Characteristics of Specimen-an Overview, Int. J. Mech. Prod. Eng. Res. Dev. 5 25–32 (2015). [Google Scholar]
  21. M.I. Ojovan, W.E. Lee, Immobilisation of Radioactive Waste in Bitumen, An Introd. to Nucl. Waste Immobil. 233–244 (2014). https://doi.org/10.1016/b978-0-08-099392-8.00016-4. [Google Scholar]
  22. O. Emmanuel, O. Ikele, T. Jamiru, A. Adesola, J. Fayomi, B. Akhiwu, B. Akhiwu, Optimization and Microstructural Evaluation of Processing Parameters on the Density and Surface Hardness of Dual Phase Steel, Sci. J. Res. Rev. 3 1–14 (2021). https://doi.org/10.33552/sjrr.2021.03.000553. [Google Scholar]
  23. B.M. Gurumurthy, S. Shankar, A. Kini, Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel, Mater. Today Proc. 5 24907–24914 (2018). https://doi.org/10.1016/j.matpr.2018.10.290. [Google Scholar]
  24. A.A. Adediran, Mechanical properties of dual phase steel quenched in bitumen medium Mechanical properties of dual phase steel quenched in bitumen medium, Leonardo Electron. J. Pract. Technol. 1–16 (2016). https://doi.org/http://lejpt.academicdirect.org. [Google Scholar]
  25. M.O.H. AMUDA, E.T.A. T.A. OLANIYAN, L.O. OSOBA, Mechanical Properties of Bitumen Quenched Dual Phase Steel, Sains Malaysiana. 46 743–753 (2017). https://doi.org/http://dx.doi.org/10.17576/jsm-2017-4605-09. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.