EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 417 (2025) MATEC Web Conf., 417 (2025) 03011 References
Open Access
Issue
MATEC Web Conf.
Volume 417, 2025
2025 RAPDASA-RobMech-PRASA-AMI Conference: Bridging the Gap between Industry & Academia - The 26th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, co-hosted by CSIR and Tshwane University of Technology, Pretoria
Article Number 03011
Number of page(s) 13
Section Materials Engineering
DOI https://doi.org/10.1051/matecconf/202541703011
Published online 25 November 2025
  1. Y. L. Hao, Z. B. Zhang, S. J. Li, and R. Yang, Microstructure and mechanical behavior of a Ti-24Nb-4Zr-8Sn alloy processed by warm swaging and warm rolling. Acta Mater. 60, 2169–2177, (2012). https://doi.org/10.1016/j.actamat.2012.01.003 [Google Scholar]
  2. J. Huang, Z. Wang, and K. Xue, Cyclic deformation response and micro mechanisms of Ti alloy Ti-5Al-5V-5Mo-3Cr-0.5Fe. Materials Science and Engineering: A. 528, 8723–8732, (2011). https://doi.org/10.1016/j.msea.2011.08.045 [Google Scholar]
  3. D. Kuroda, M. Niinomi, M. Morinaga, Y. Kato, and T. Yashiro, Design and mechanical properties of new i type titanium alloys for implant materials. Materials Science and Engineering A: 243, 244-249, (1998). https://doi.org/10.1016/S0921-5093(97)00808-3 [Google Scholar]
  4. E. Bertrand, P. Castany, I. Péron, and T. Gloriant, Twinning system selection in a metastable β-titanium alloy by Schmid factor analysis. Scr Mater. 64, 1110–1113, (2011). https://doi.org/10.1016/j.scriptamat.2011.02.033 [Google Scholar]
  5. A. Devaraj., V.V., Joshi, A., Srivastava, S., Manandhar, V., Moxson, V.A., Duz, and C., Lavender, A low-cost hierarchical nanostructured beta-titanium alloy with high strength. Nat Commun. 7, 11176, (2016). https://doi.org/10.1038/ncomms11176 [Google Scholar]
  6. S. Bahl, S. Suwas, and K. Chatterjee, Comprehensive review on alloy design, processing, and performance of β Titanium alloys as biomedical materials. International Materials Reviews. 66, 114–139, (2021). https://doi.org/10.1080/09506608.2020.1735829 [Google Scholar]
  7. M. Niinomi, M. Nakai, and J. Hieda, Development of new metallic alloys for biomedical applications. Acta Biomaterialia. 8, 3888-3903, (2012). https://doi.org/10.1016/j.actbio.2012.06.037 [Google Scholar]
  8. S. Ehtemam-Haghighi, Y. Liu, G. Cao, and L. C. Zhang, Phase transition, microstructural evolution and mechanical properties of Ti-Nb-Fe alloys induced by Fe addition. Mater Des. 97, 279–286, (2016). https://doi.org/10.1016/j.matdes.2016.02.094 [Google Scholar]
  9. M. Morinaga, Alloy design based on molecular orbital method. Materials Transactions. 57, 213-226. (2016). https://doi.org/10.2320/matertrans.M2015418 [Google Scholar]
  10. P. J. Bania, Beta Titanium Alloys and Their Role in the Titanium Industry. Jom, 46, 16-19, (1994). https://doi.org/10.1007/BF03220742 [Google Scholar]
  11. F. Sun., J.Y., Zhang, M., Marteleur, T., Gloriant, P., Vermaut, D., Laillé, P., Castany, C., Curfs, P.J., Jacques, and F.J.A.M., Prima, Investigation of early-stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects. Acta Mater. 61, 6406–6417, (2013). https://doi.org/10.1016/j.actamat.2013.07.019 [Google Scholar]
  12. A. Bhattacharjee, V. K. Varma, S. V Kamat, A. K. Gogia, and S. Bhargava, Influence of b Grain Size on Tensile Behavior and Ductile Fracture Toughness of Titanium Alloy Ti-10V-2Fe-3Al. Metall Mater Trans A. 37, 1423–1433 (2006). https://doi.org/10.1007/s11661-006-0087-x [Google Scholar]
  13. S. Sadeghpour, S. M. Abbasi, M. Morakabati, A. Kisko, L. P. Karjalainen, and D. A. Porter, On the compressive deformation behavior of new beta titanium alloys designed by d-electron method. J Alloys Compd. 746, 206–217, (2018). https://doi.org/10.1016/j.jallcom.2018.02.212 [Google Scholar]
  14. L. Wang, W. Lu, J. Qin, F. Zhang, and D. Zhang, Microstructure and mechanical properties of cold-rolled TiNbTaZr biomedical β titanium alloy. Materials Science and Engineering: A. 490, 421–426, (2008). https://doi.org/10.1016/j.msea.2008.03.003 [Google Scholar]
  15. X. H. Min, T. Nishimura, S. Emura, N. Sekido, K. Tsuzaki, and K. Tsuchiya, Effects of Fe addition on tensile deformation mode and crevice corrosion resistance in Ti– 15Mo alloy. Materials Science and Engineering: A. 527, (2010). https://doi.org/10.1016/j.msea.2009.12.050 [Google Scholar]
  16. A. G. Paradkar, S. V. Kamat, A. K. Gogia, and B. P. Kashyap, On the validity of Hall-Petch equation for single-phase β Ti-Al-Nb alloys undergoing stress-induced martensitic transformation. Materials Science and Engineering: A. 520,168–173, (2009). https://doi.org/10.1016/j.msea.2009.05.041 [Google Scholar]
  17. S. Hanada and O. Izumi, Transmission Electron Microscopic Observations of Mechanical Twinning in Metastable Beta Titanium Alloys. Metallurgical Transactions A. 17, 1409-1420, (1986). https://doi.org/10.1007/BF02650122 [Google Scholar]
  18. J. Lin., S., Ozan, Y., Li, D., Ping, X., Tong, G. Li, and C., Wen, Novel Ti-Ta-Hf-Zr alloys with promising mechanical properties for prospective stent applications. Scientific Reports. 6, 37901, (2016). https://doi.org/10.1038/srep37901 [Google Scholar]
  19. C. Catanio Bortolan., L.C., Campanelli, P., Mengucci, G., Barucca, N., Giguère, N., Brodusch, C., Paternoster, C., Bolfarini, R., Gauvin, and D. Mantovani, Development of Ti-Mo-Fe alloys combining different plastic deformation mechanisms for improved strength-ductility trade-off and high work hardening rate. J Alloys Compd. 925, 166757, (2022). https://doi.org/10.1016/j.jallcom.2022.166757 [Google Scholar]
  20. P. Castany, T. Gloriant, F. Sun, and F. Prima, Design of strain-transformable titanium alloys. Comptes Rendus. Physique. 19, 710-720. (2018). https://doi.org/10.1016/j.crhy.2018.10.004 [Google Scholar]
  21. M. Marteleur, F. Sun, T. Gloriant, P. Vermaut, P. J. Jacques, and F. Prima, On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects. Scr Mater. 66, 749–752, (2012). https://doi.org/10.1016/j.scriptamat.2012.01.049 [Google Scholar]
  22. F. Sun, F. Prima, and T. Gloriant, High-strength nanostructured Ti-12Mo alloy from ductile metastable beta state precursor. Materials Science and Engineering: A. 527, 4262–4269, (2010). https://doi.org/10.1016/j.msea.2010.03.044 [Google Scholar]
  23. M. Morinaga, N. Yukawa, and H. Adachi, Electronic Structure and Phase Stability of Titanium Alloys. Tetsu-to-Hagane, 72, 555-562, (1986). https://doi.org/10.2355/tetsutohagane1955.72.6_555 [Google Scholar]
  24. M. Abdel-Hady, K. Hinoshita, and M. Morinaga, General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters. Scr Mater. 55, 477–480, (2006). https://doi.org/10.1016/j.scriptamat.2006.04.022 [Google Scholar]
  25. C. Li, D. G. Lee, X. Mi, W. Ye, S. Hui, and Y. Lee, Phase transformation and age hardening behavior of new Ti-9.2Mo-2Fe alloy. J Alloys Compd. 549, 152–157, (2013). https://doi.org/10.1016/j.jallcom.2012.08.065 [Google Scholar]
  26. M. Ahmed, D. Wexler, G. Casillas, O. M. Ivasishin, and E. V. Pereloma, The influence of β phase stability on deformation mode and compressive mechanical properties of Ti-10V-3Fe-3Al alloy. Acta Mater. 84, 124–135, (2015). https://doi.org/10.1016/j.actamat.2014.10.043 [Google Scholar]
  27. M. Abdel-Hady, H. Fuwa, K. Hinoshita, H. Kimura, Y. Shinzato, and M. Morinaga, Phase stability changes with Zr content in β-type Ti-Nb alloys. Scr Mater. 57, 1000–1003, (2007). https://doi.org/10.1016/j.scriptamat.2007.08.003 [Google Scholar]
  28. E. K. Molchanoca and S. G. Glazunov, Phase diagrams of Titanium Alloys. Israel Program for scientific translations. (1965). [Google Scholar]
  29. C. Li, J. H. Chen, X. Wu, W. Wang, and S. Van Der Zwaag, Tuning the stress induced martensitic formation in titanium alloys by alloy design. J Mater Sci. 47, 4093–4100, (2012). https://doi.org/10.1007/s10853-012-6263-z [Google Scholar]
  30. R. P. Kolli, W. J. Joost, and S. Ankem, Phase Stability and Stress-Induced Transformations in Beta Titanium Alloys. JOM. 67, 1273-1280, (2015). https://doi.org/10.1007/s11837-015-1411-y [Google Scholar]
  31. Q. Wang, C. Dong, and P. K. Liaw, Structural Stabilities of β-Ti Alloys Studied Using a New Mo Equivalent Derived from [β/(α + β)] Phase-Boundary Slopes. Metall Mater Trans A Phys Metall Mater Sci. 46, 3440–3447, (2015). https://doi.org/10.1007/s11661-015-2923-3 [Google Scholar]
  32. Ł. Żrodowski., R., Wróblewski, T., Choma, B., Morończyk, M., Ostrysz, M., Leonowicz, W., Łacisz, P., Błyskun, J.S., Wróbel, G., Cieślak, and B., Wysocki, Novel cold crucible ultrasonic atomization powder production method for 3d printing. Materials. 14, 2541, (2021). https://doi.org/10.3390/ma14102541 [Google Scholar]
  33. S. Banerjee, R. Tewari, and G. K. Dey, Omega phase transformation-morphologies and mechanisms. International Journal of Materials Research, 97, 963-977, (2022). [Google Scholar]
  34. M. J. Phasha, A. S. Bolokang, and P. E. Ngoepe, Solid-state transformation in nanocrystalline Ti induced by ball milling. Mater Lett. 64, 1215–1218, (2010). https://doi.org/10.1016/j.matlet.2010.02.054 [Google Scholar]
  35. X. Zhao, M. Niinomi, M. Nakai, and J. Hieda, Beta type Ti-Mo alloys with changeable Young’s modulus for spinal fixation applications. Acta Biomater. 8, 1990–1997, (2012). https://doi.org/10.1016/j.actbio.2012.02.004 [Google Scholar]
  36. M. Sabeena, S. Murugesan, P. Anees, E. Mohandas, and M. Vijayalakshmi, Crystal structure and bonding characteristics of transformation products of bcc β in Ti-Mo alloys. J Alloys Compd. 705, 769–781, (2017). https://doi.org/10.1016/j.jallcom.2016.12.155 [Google Scholar]
  37. M. Nakai, M. Niinomi, X. Zhao, and X. Zhao, Self-adjustment of Young’s modulus in biomedical titanium alloys during orthopedic operation. Mater Lett. 65, 688–690, (2011). https://doi.org/10.1016/j.matlet.2010.11.006 [Google Scholar]
  38. H. Matsumoto, S. Watanabe, and S. Hanada, Microstructures and mechanical properties of metastable β TiNbSn alloys cold rolled, and heat treated. J Alloys Compd. 439, 146–155, (2007). https://doi.org/10.1016/j.jallcom.2006.08.267 [Google Scholar]
  39. Y. Yang., S. Q. Wu, G. P. Li, Y. L. Li, Y. F. Lu, K. Yang, and P. Ge, Evolution of deformation mechanisms of Ti-22.4Nb-0.73Ta-2Zr-1.34O alloy during straining. Acta Mater. 58, 2778–2787, (2010). https://doi.org/10.1016/j.actamat.2010.01.015 [Google Scholar]
  40. X. H. Min, S. Emura, T. Nishimura, K. Tsuchiya, and K. Tsuzaki, Microstructure, tensile deformation mode and crevice corrosion resistance in Ti-10Mo-xFe alloys. Materials Science and Engineering: A. 527, 5499–5506, (2010). https://doi.org/10.1016/j.msea.2010.06.016 [Google Scholar]
  41. F. I. Jamhari., F.M., Foudzi, M.A., Buhairi, A.B., Sulong, N.A.M., Radzuan, N., Muhamad, I.F., Mohamed, N.H., Jamadon, and K.S., Tan, Influence of heat treatment parameters on microstructure and mechanical performance of titanium alloy in LPBF: A brief review. 24, 4091-4110. (2023). https://doi.org/10.1016/j.jmrt.2023.04.090 [Google Scholar]
  42. N. Saba, M. Jawaid, and M. T. H. Sultan, An overview of mechanical and physical testing of composite materials. In Mechanical and Physical Testing of Bio composites, Fibre-Reinforced Composites and Hybrid Composites. 1–12. https://doi.org/10.1016/B978-0-08-102292-4.00001-1 [Google Scholar]
  43. B. O’Brien, J. Stinson, and W. Carroll, Initial exploration of Ti-Ta, Ti-Ta-Ir and Ti-Ir alloys: Candidate materials for coronary stents. Acta Biomater. 4, 1553–1559, (2008). https://doi.org/10.1016/j.actbio.2008.03.002 [Google Scholar]
  44. Davis J.R, Metallic Materials, Handbook of materials for medical devices. ASTM International. (2003). [Google Scholar]
  45. J. Lin., S., Ozan, Y., Li, D., Ping, X., Tong, G. Li, and C., Wen, Novel Ti-Ta-Hf-Zr alloys with promising mechanical properties for prospective stent applications. Scientific Reports. 6, 37901, (2016). https://doi.org/10.1038/srep37901 [Google Scholar]
  46. L. M. Kang and C. Yang, “A Review on High-Strength Titanium Alloys: Microstructure, Strengthening, and Properties. Advanced Engineering Materials. 21, 1801359, (2019). https://doi.org/10.1002/adem.201801359 [CrossRef] [Google Scholar]
  47. L. Nie, Y. Zhan, H. Liu, and C. Tang, Novel β-type Zr-Mo-Ti alloys for biological hard tissue replacements. Mater Des. 53, 8–12, (2014). https://doi.org/10.1016/j.matdes.2013.07.008 [Google Scholar]
  48. Joon B. Park and Bronzino D Joseph, Biomaterials, 1st Edition. Boca Raton: CRC Press, 250 (2002). https://doi.org/10.1201/9781420040036 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.