Open Access
| Issue |
MATEC Web Conf.
Volume 415, 2025
International Colloquium on Mechanical and Civil Engineering (ICMCE’2025)
|
|
|---|---|---|
| Article Number | 01004 | |
| Number of page(s) | 14 | |
| Section | Advanced Materials and Manufacturing Processes | |
| DOI | https://doi.org/10.1051/matecconf/202541501004 | |
| Published online | 27 October 2025 | |
- Tianyi Sun and al. Sensitivity analysis of turbine stage aerothermal characteristics and blade cooling performance considering combustor swirl and hot spot. Applied Thermal Engineering 2024 [Google Scholar]
- Cai, L; He, Y; Wang, S; Li, Y; Li, F. Thermal–Fluid–Solid Coupling Analysis on the Temperature and Thermal Stress Field of a Nickel-Base Superalloy Turbine Blade. Materials 2021 [Google Scholar]
- Ekkad, S.V.; Singh, P. Detailed Heat Transfer Measurements for Rotating Turbulent Flows in Gas Turbine Systems. Energies 2021 [Google Scholar]
- Laveneziana, L.; Rosafio, N.; Salvadori, S.; Misul, D.A.; Baratta, M.; Forno, L.; Valsania, M.; Toppino, M. Conjugate Heat Transfer Analysis of the Aero-Thermal Impact of Different Feeding Geometries for Internal Cooling in Lifetime Extension Processes for Heavy-Duty Gas Turbines. Energies 2022 [Google Scholar]
- LI Xu, SUN BO, YOU Hongde, WANG Lei. Evolution of Rolls-Royce air-cooled turbine blades and feature analysis, “APISAT2014”, 2014 Asia-Pacific International Symposium on Aerospace Technology, APISAT2014. [Google Scholar]
- Wang, W.; Yan, Y.; Zhou, Y.; Cui, J. Review of Advanced Effusive Cooling for Gas Turbine Blades. Energies 2022 [Google Scholar]
- Reza Kashyzadeh and K, Souri K. A short introduction of blade cooling mechanisms in old gas turbines with the aim of proper distribution of temperature profile”. J Adv Therm Sci Res. 2023 [Google Scholar]
- Amith Shetty K., Bharath M. P., Ganesh K., Kapilan Natesan, Arun Kumar G. L., and Sadashiva Prabhu S. Impact of thermal barrier coatings on temperature distribution of high-pressure gas turbine rotor blades: a computational study, COGENT ENGINEERING 2024 [Google Scholar]
- Md Redwan Iqbal, Fardeen Sayed and Khalid Sattar, CFD Analysis of Gas Turbine Blade Cooling with Different Materials and Cooling Hole Configurations, Conference Paper 2024 [Google Scholar]
- Qilong Liu and al. A new spiral cooling structure located in the U-shaped cooling channel for turbine rotating blades. Applied Thermal Engineering. 2025 [Google Scholar]
- S. Baek and al. Investigation of the relationship between the 3D flow structure and surface heat transfer within a realistic gas turbine blade trailing edge internal serpentine cooling channel. International Journal of Heat and Mass Transfer. 2022 [Google Scholar]
- Weilong Wu and al. Leading edge impingement cooling analysis with separators of a real gas turbine blade. Applied Thermal Engineering. 2022 [Google Scholar]
- Jinfu Chen and al. Multi-objective optimization on internal cooling strategies for gas turbine blade leading edges. International Communications in Heat and Mass Transfer. 2023 [Google Scholar]
- Meng Gu, Hai-wang Li, Zhi-yu Zhou, Gang Xie, Song Liu, Yu-zhu Lou, A comprehensive investigation of the effect of hole diameter and number on film cooling performance of rotating blade leading edge. Journal of Aerospace Science and Technology [Google Scholar]
- Cunliang LIU, Fan ZHANG, Shuaiqi ZHANG, Qingqing SHI, Hui SONG, Experimental investigation of the full coverage film cooling effectiveness of a turbine blade with shaped holes, Chinese Journal of Aeronautics 2020 [Google Scholar]
- Kewen Xu and al. Effects of cooling hole blockage on heat transfer and film cooling effectiveness of gas turbine squealer tip. International Journal of Heat and Fluid Flow 2025 [Google Scholar]
- Xu, L.; Sun, Z.; Ruan, Q.; Xi, L.; Gao, J.; Li, Y. Development Trend of Cooling Technology for Turbine Blades at Super-High Temperature of above 2000 K. Energies 2023 [Google Scholar]
- Peipei Fan; Xiaoxu Wu. Flow field simulation and protective effectiveness research on sand barriers by computational fluid dynamics (CFD) a review. Journal of Wind Engineering & Industrial Aerodynamics. 2025 [Google Scholar]
- Bouhelal Abdelhamid, and Arezki Smaili, Introduction à la CFD (Computational Fluid Dynamics). Ecole Nationale Polytechnique, Alger, 2022, pp.39–40. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.